Recent content by Mud

Mac-It has the cams $32.30 each https://www.macit.com/product/spindle-nose-parts/

I really thought I took more in process photos, this is all I found. They are not entirely relevant to what you want to do anyhoo. I used the 3 empty D1-8 pin holes to accept bolts. The D1-6 drive plate was drilled for those bolts, and was turned to receive the chuck's taper. I did this so the...

Yep, doing fine so far.

Mac-it has them - https://www.macit.com/product/spindle-nose-parts/ I reworked a drive plate into an adapter and bolted it to the D1-8 chuck after backing out the drive pins from the chuck. I'll post some photos tomorrow from the shop. I'm at home today, I had my second cataract surgery this...

I recently made an adapter to attach a D1-8 chuck to a D1-6 spindle. It stays mounted on the chuck. That's the reverse of what you want, but the principle could work as well for you.

What kind of bearing is it? Roller? Taper? Ball? And what made it fail? This one should still be good, it's had about 10 hours of light use on a wells-Index mill in it's lifetime. I had an old Haas rotary table that had no bearing, it was steel against iron on a taper, I figured this would be...

Spacer is sold.

Excellent condition, near new except for the shop worn paint from being under my workbench for decades . Not sure of the manufacturer, I bought it from Enco in 1979 but all the fasteners are Imperial, not metric, the T slots are 5/8". Includes angle mount and tailstock, both never used. Almost...

Complete setup including 50+ lbs of powder, use to build up shafts and etc and apply coatings. $2000. The O/A hoses are stiff and need replaced, the rest is ready to go. Full documentation included. I bought it new and kept everything.

8" wide jaws, opens to 14.5". Weighs approx 300 lbs. 8 tons clamping force. No hard jaws. $650 Located in PA 17602

Toolmex brand. Good used condition, operates as it should. chuck is nice and tight, takes normal 8" T&G chuck jaws. Weighs about 145 lbs. $600 Located in PA.

OOhhh, rusty! This photo makes the platter look like it's plated.

Just saw another Newbould on FB for $1000 https://www.facebook.com/marketplace/item/1150771166270104/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A84478157-53ed-4f9a-bed7-c4265c57c2e2

I learned on Smartcam. It had a trace feature in the post editor that you could turn on, when it was on it showed where each line of code was created in the PP. That made it a breeze to find that place and make a change. (I did however have to pay someone to create a post for an old control I...

I cringe every time I see that also. As well as the CAM sales pitches that say "We supply a post editor so you can just build whatever you need yourself". Post issues are the very first hurdle to clear when I make a decision about CAM. BTDT.