Search results

Look to see if there are any M Codes for high pressure clamping. Doosans have this, 2 settings for the chuck pressure. High pressure combats the centrifigal forces.

5 is correct on all of our machines.

Yamazen is there to be bugged, they owe you that much, to be honest. It would greatly surprise me if they don't have probe routines for your machine. The only way to find out is to ask. Also, if you bought the probe from Renishaw, they should have Inspection Plus for Brothers. Practical...

The true working diameter can only be found with a calibration routine since it takes into account the ball runout, especially at different orientations of the spindle. Paul

Well, looky here guys. "Cambrio’s product portfolio includes GibbsCAM for production milling, turning, and mill turn operations, Cimatron for mold and die, as well as SigmaNEST for sheet metal fabrication. "...

Yeah, and AD now owns Camplete. I'm just dying to see what they do to that.

I don't think so. But this is going back 25 years or so. The 16i was the 31i of it's day. The RISC chip was like a math coprocessor, it handled the extra horsepower required for the advanced functions. Keep in mind that RISC was on a few PC's back then too. I think Fanuc just capitalized on the...

Yes, probably wasn't discovered back when the 16i was hatched. Just a more powerful version of Q2.

I read a little bit more on this and it turns out that Smooth Interpolation is turned on only for the axis specified in the command line. Eliminate either X, Y and/or Z and it is not turned on for those axis. Why someone would need that is beyond me. Maybe if you are doing surfacing in only one...

This is because ALL of these work only within feed moves. No G00 allowed. I'm quite familiar with the application of these on a 31i but not so much on the 16i. Had a risc machine in the 90's but didn't pursue the fine points. Just used G5P10000. It really did help. If you think Fanuc is mum on...

The reason I asked is because this subject came up yesterday at work. I work for Doosan. Doosan and Mori may differ but not enough that any Capto holder manufacturer would need different holders for each MTB. So, the attached document may apply but at the very least, might shed some light on the...

What machine is this on?

This is a parameter issue, causing movement when offsets are cancelled. Also, why not wait to cancel offsets until you retract Z and then send X home. Then cancel.

Here is the latest version of that document. It covers the Oi series up to the F control and covers the 30 series controls. Also has pinout guides for cables.

When you say "overwrite the archive". do you mean on your card or USB or the archive in the control. It may be looking at the header of the archive itself and not the name. Try backing up to a clean USB stick or card. seimens are weird like that. That's why I like Heidenhain, everything is man...

I have this, see attached. Not sure if it's what you are looking for. Check it out.

This document is for doing a complete backup on a Fanuc Oi and 30 series controls.

Since I work for a machine tool builder, I make a generous effort to get people to do backups. Complete backups when possible but at the very least get a backup of your parameters. The attached file is for most current Fanuc controls. The new iHMI controls have a slightly different method...

Hello out there. So, I guess this is the first post in the Doosan forum. Just letting everyone know I work for Doosan and am offering my support as an applications engineer specializing in milling and 5 axis but I will support everything if I can.