If anyone here has that control, could you look at the PMC board and see if it has ROMs or ROM sockets marked 0E1 and 0E2?
And your excuse is?Sorry I missed this, as I have one that I could have checked too. Middle of the night here though when you posted!
And here I thought I was doing good by going to bed at a "normal hour" for once!And your excuse is?
#RealEngineersNeverOffDuty....
On my OTc the ladder chips are on the memory card (a3) and I don't see any sockets on the main board without pulling cards and the power supply. Which I would gladly do if you still needed to know.If anyone here has that control, could you look at the PMC board and see if it has ROMs or ROM sockets marked 0E1 and 0E2?
On my OTc the ladder chips are on the memory card (a3) and I don't see any sockets on the main board without pulling cards and the power supply. Which I would gladly do if you still needed to know.
My OTb basically has the memory card integrated into the main board with the ladder chips being on the main board.
Next time you're in a rush just call me and I would have checked right away and you could have posted the results.
If you're in the market for an Oc control I may have a friend selling one cheap.
Edit: I was thinking PMC board was the main board and not a card. My machine doesn not have a PMC card. Perhaps that's was requirered for one of the larger step number ladders and the ladder got moved from the memory card to the pmc card.