Free Collets and Guide Bushings

[Charlie Gary]

We have a Tsugami SX26 Swissturn that has reached its end-of-life status and is being replaced. This leaves us with a couple of drawers full of collets and guide bushings that we will give to whoever wants them. We have main spindle and sub-spindle collets, and main spindle guide bushings. Anybody want them?

 

[chad883]

I can't seem to find what collets that machine takes. Looks like the guide bushing may be a CD25? That will fit my citizen L25, but not sure about the collets. Are the collets TF30 by chance?

 

[Charlie Gary]

I can't seem to find what collets that machine takes. Looks like the guide bushing may be a CD25? That will fit my citizen L25, but not sure about the collets. Are the collets TF30 by chance?

I don't know for sure. They are marked S&M 0166, if that helps. Thay all seem to be sourced from Southwick & Meister.

 

[chad883]

Thanks, those are not the same collet. If you don't get anyone wanting them I would be interested in the guide bushings. Those will fit.

 

[Charlie Gary]

 

[Dualkit]

If you go to S&M and put in 0166 on the collet page and search it only hits on a couple 25 & 26mm Tsugamis. They seem to be very machine specific.

 

[chad883]

I checked the specs on S&M site.
Diameter is 34mm
Length is 65mm
angle is 15 deg

I need 30mm dia
80mm length
16 deg

 

[Charlie Gary]

Thanks, those are not the same collet. If you don't get anyone wanting them I would be interested in the guide bushings. Those will fit.

Send me a message with your name and mailing address and we can work out getting them to you. Just to be completely transparent, it is not my intent to spend my own money to ship guide bushings without a plan for me to get my money back.