Genos L2000-e With OSP-300PLA-e Control X-axis Live Tool Tapping Problem

[Charlie Gary]

I'm programming and running the machine mentioned above, and I'm having an issue with X-axis live tool tapping. The issue is when feeding into or out of the hole the machine seems to be feeding in inches per minute mode instead of inches per revolution. Here's a copy of the code the machine creates for itself. It's a 6-32 tap for those who are curious.

NAT07
N0100 M110
N0101 M146 M15 M08
N0102 G00 X0.7 Z-0.25 T0707 SB=443
N0103 C0
N0104 G138 C0
N0105 G00 Y0
N0106 G178 X-0.3 Y0 Z-0.25 C0 I0 F1 J32
N0107 Z-1.04
N0108 G180
N0109 G00 X0.35 Y0 Z-1.04
N0110 G136
N0111 M12 M09
N0112 M109
N0113 X20 Z20 T0700
N0114 M01

 

[Mr. M]

You just need to specify G94/G95 to tap in feed per rev or feed per minute

 

[Charlie Gary]

I forgot to post a follow up. I did have to add a G95 to the program, and i discovered it couldn't be on the same line as the canned cycle code. I also followed the recommendation of the application engineer at Gosiger and changed the G178 to a G184, along with going into the machine's Multiple Machining parameters and changing G184/G298 tapping mode from float to concurrent. Now the machine taps holes with X-axis live tools like it should.