For Sale - N.O.S. Seco Inserts...

Jashley73 · Jan 6, 2024

V Turning Inserts - Here's what I have...

VNMG332 - (14pcs) - 2 pcs. are uncoated grade. Best for using them on non-ferrous material.
VNMG 331 - (6pcs) - 6 pcs. are uncoated grade. Best for using them on non-ferrous material.
VNMG 333 - (2pcs)
$20 Plus Shipping

VBMT 331 (4pcs) - Single sided, positive inserts...
VBMT 332 (4pcs) - Single sided, positive inserts...
$10 Plus Shipping

Doug · Jan 6, 2024

Mud said:
I wonder if a reseller like Hemly would buy them at reasonable prices? Do you deal with them, or know about their buying practices?

I agree, as the OP is selling them pretty far under even Hemly's prices.
However, Mr. Hemly passed a few years ago, and the new owner may not have the same policies.
FWIW the store moved 10 miles, and is in a brand new building, the $1.50 lb hardware is pretty much gone as well.

The OP is doing a nice thing for the members here though.

Herding Cats · Jan 6, 2024

Jashley73 said:
V Turning Inserts - Here's what I have...

VNMG332 - (14pcs) - 2 pcs. are uncoated grade. Best for using them on non-ferrous material.
VNMG 331 - (6pcs) - 6 pcs. are uncoated grade. Best for using them on non-ferrous material.
VNMG 333 - (2pcs)
$20 Plus Shipping

VBMT 331 (4pcs) - Single sided, positive inserts...
VBMT 332 (4pcs) - Single sided, positive inserts...
$10 Plus Shipping

View attachment 3429

View attachment 3430

I'll take the vnmg. I'll message you later today.

Jashley73 · Jan 6, 2024

Positive Square Inserts

SCET1206... Inserts (20pcs) - These are for R220.21 High-Feed mills
$20 Plus Shipping

SCMT32.52 - (20pcs) - Single-sided, positive tuning inserts
$15 Plus Shipping

SPGX0703-C1 T400D - These are the inboard/center inserts, for Seco Perfomax drills. These will last you A LONG TIME...
$15 Plus Shipping

Jashley73 · Jan 6, 2024

SNMG 43x Turning Inserts

SNMG432 (5pcs)
SNMM432 (2pcs) - Singled Sided, very tough...
SNMG433 (37pcs)
$25 Plus Shipping

Jashley73 · Jan 6, 2024

TNMG Turning Inserts

TNMG331 (10pcs)
TNMG332 (15pcs) - 8pcs are uncoated - best for non-ferrous materials
TNMG333 (7pcs) - 2pcs are TNMM/single sided.
$15 Plus Shipping

TNMG431 (7pcs)
TNMG432 (4pcs)
TNMG433 (2pcs)
$10 Plus Shipping

Herding Cats · Jan 6, 2024

I'll take the tnmg 300 series

machinery_e · Jan 6, 2024

I definitely want the Octomill inserts and these-

OFE_070405TN Inserts - (41pcs) - Solid inserts, no holes, must have a wedge-clamp cutter body
$35 Plus Shipping

OFMT070405T_ Inserts - (12pcs)
$15 Plus Shipping

OFEX05T305TN Inserts - (35pcs)
$25 Plus Shipping

SCMT32.52 - (20pcs) - Single-sided, positive tuning inserts
$15 Plus Shipping

SNMG432 (5pcs)
SNMM432 (2pcs) - Singled Sided, very tough...
SNMG433 (37pcs)
$25 Plus Shipping

I could use these-

SPGX0703-C1 T400D - These are the inboard/center inserts, for Seco Perfomax drills. These will last you A LONG TIME...
$15 Plus Shipping

And the rest of the Turbomill inserts that eKretz hasn't taken.

With that said-I think you're prices are too low. So for the definately's I will offer you double what you're asking. "I could use" if no one else can use them, I would buy them for your asking prices.

Jashley73 · Jan 6, 2024

machinery_e said:
I definitely want .......

With that said-I think you're prices are too low. So for the definately's I will offer you double what you're asking. "I could use" if no one else can use them, I would buy them for your asking prices.

Send me a PM please. If you don't mind, could you copy that text in the PM for the items that you want.

Generally, regarding pricing... I've had these sitting in my garage for about 7 years now, and just recently re-discovered them. If I really wanted to "make money" from them, I'd spend more time and put them on eBay. But I don't need the money, I don't feel like committing that kind of time to them, and I'd rather pass them along to this crew, if you guys have any use for them... I also realize that there's not a ton of value in buying inserts with only 2/3/4 pcs. in that grade/chip-breaker/nose radius, etc... So I really don't mind selling them for pennies on the dollar like this.

Jashley73 · Jan 6, 2024

DNMG33x Turning Inserts

These are a little smaller than most DNMG's that people are accustomed to seeing. I think they're neat little inserts. Anyway, Seco switched from calling them DNMG, to DNMU at some point, for whatever silly reason. I checked the ISO code, and I can't understand the difference between the "G" and the "U" designation. Best I can tell is that the counterbore for the center hole may be different. Anyway...

DNMX 331W (4pcs) - Wiper-nose.
DNMX 332W (31pcs) - Wiper-nose. All same grade/breaker/etc...
DNMX 331 (2pcs)
DNMG/U 332 (24pcs)
$45 Plus Shipping

Jashley73 · Jan 6, 2024

DCMT 32.5x Positive Turning Inserts

DCMT32.51 (2pcs)
DCMT32.52 (29pcs)
$30 Plus Shipping

machinery_e · Jan 6, 2024

I can use these!
DCMT32.51 (2pcs)
DCMT32.52 (29pcs)
$30 Plus Shipping

Carbidebob · Jan 6, 2024

Okay guy.
How to you expect me to survive against this pricing..... BIG

So to others here Jasley73 is one of the few to come visit me. He was Seco/Carboly sales but wanted to know everything.
I think he got cut/trashed or whatever by those upstairs. I would file that under big mistake.
Much respect given to him and hope he does well.

Jashley73 · Jan 8, 2024

Carbidebob said:
Okay guy.
How to you expect me to survive against this pricing..... BIG

So to others here Jasley73 is one of the few to come visit me. He was Seco/Carboly sales but wanted to know everything.
I think he got cut/trashed or whatever by those upstairs. I would file that under big mistake.
Much respect given to him and hope he does well.

Ha! Thanks Bob - It was a pleasure getting to meet you, and I've enjoyed our chats since. You should write a book someday. I feel like you have several lives' worth of experience, and my guess is you aren't close to slowing down yet.

And not to worry - With prices this low, once they're gone, they're gone!

Jashley73 · Jan 10, 2024

Quick check in fella's - My attention has been pulled away from this for a few days with other things. Also, I'm still waiting on the shipping supplies to come in, so I haven't felt too rushed to get everything listed.

If you have "claimed" some items, rest assured, I have them gathered with your name's on them.

I'll try to finish posting everything this week, and then get everything ready to ship out.

Thank you all for your patience.