For Sale - N.O.S. Seco Inserts...

[Jashley73]

MDT "Multi-Directional-Turning" Turn/Groove Inserts. These are double-sided, 16mm-long series inserts, all 4mm wide, and nose-radii from .016" to .008". (These list between $25 and $30 a piece...)

LCMF16040x-0400 Inserts - (27pcs)
$40 Plus Shipping

 

[Jashley73]

Ceramic Turning Inserts...

CNGN432 - (20pcs)
$15 Plus Shipping

RNGN1204 - (4pcs)
$10 Plus Shipping

RNGN44 - (2pcs)
$5 Plus Shipping

 

[Herding Cats]

I'll take the CNGN 432

 

[Jashley73]

I'll take the CNMG 432

Just to clarify, they're not CNMG - They're CNGN Ceramic insert with no center clamping hole. Needs a ceramic-styled top-clamping tool.

You tell me if you want them or not.

 

[Jashley73]

Last items...


APKT 1604 Milling Inserts... These are all the same size, and should fit the same milling cutter bodies. (If you're actually still using these, shame on you! It's 2023 - time for an upgrade already!)
(Edit: They still make them, and they list for over $20 each!)

APMX Inserts - (30pcs)
APKT Inserts - (38pcs) - 17pcs are uncoated grade - Best for use on non-ferrous materials.
$40 Plus Shipping

 

[Garwood]

Put me down for the APKT's. I have a gagillion cutter bodies for these so might as well use 'em up.

 

[Jashley73]

Here's a list of what's still available...

If anyone wants these added to their "cart" let me know and I'll do so.

Shipping stuff is here, so if we've PM'd, be on the lookout.

Thanks you guys - I didn't expect to have this much interest!



DNMG44x Turning Inserts (Thicker, requires a thinner shim)...
28pcs, $20, Page 1, Post #14

SEE/MX QuattroMill Inserts, 9mm
24pcs, $15, Page 1, Post #16

SEE/MX QuattroMill Inserts,12mm
46pcs, $30, Page 1, Post #16

SEE/MX QuattroMill Inserts, 15mm
9pcs, $10, Page 1, Post #16

XOEX10 - Turbo-10 Milling Inserts
10pcs, $15, Page 1, Post #17

XOEX09 - Turbo-9 Milling Inserts
23pcs, $20, Page 1, Post #17

VBMT33x Turning Inserts
9pcs, $10, Page 2, Post #21

SCET1206 High-Feed Mill Inserts
20pcs, $20, Page 2, Post #24

TNMG43x Turning Inserts
13pcs, $10, Page 2, Post #26

DNMG33x Turning Inserts (small DNMG's)
61pcs, $45, Page 2, Post #30

SNMG 64x Turning Inserts
26pcs, $40, Page 2, Post #37

RCMT1204 Turning Inserts...
56pcs, $40, Page 2, Post #40

LCMF1604 MDT Grooving/Turning/Parting Inserts...
27pcs, $40, Page 3, Post #41

RNGN 43/44 Ceramic Turning Inserts
6pcs, $15, Page 3, Post #42

 

[Mr. M]

Got everything today. Thank you!

 

[Garwood]

Received mine as well! Thanks Justin!

 

[Mud]

Do you have anything in an APKT1003 insert? I chew up a lot of them cutting welds.

 

[TeachMePlease]

Okay guy.
How to you expect me to survive against this pricing..... BIG

So to others here Jasley73 is one of the few to come visit me. He was Seco/Carboly sales but wanted to know everything.
I think he got cut/trashed or whatever by those upstairs. I would file that under big mistake.
Much respect given to him and hope he does well.

Hey now... YOU'RE supposed to come visit ME!

 

[Herding Cats]

Got mine also, thanks!

 

[Jashley73]

Glad to see everything arriving safely!

Do you have anything in an APKT1003 insert? I chew up a lot of them cutting welds.

Unfortunately, everything is sold.

Thank you gentlemen!

 

[Jashley73]

If the moderators want to leave this thread open, in case you guys have questions about the grades, chip-breakers, edge-preps, etc, feel free. Otherwise, they're welcome to close it if they'd like.

 

[Herding Cats]

If the moderators want to leave this thread open, in case you guys have questions about the grades, chip-breakers, edge-preps, etc, feel free. Otherwise, they're welcome to close it if they'd like.

I honestly don't feel the need to close threads unless it becomes a problem somehow. We are all big boys here

 

[eKretz]

Got mine too, thank you sir!

 

[Carbidebob]

Should I ask how someone ended up with the sales guy full of "in the car truck back" full off stuff.
100 percent here that things went sideways, bosses and such.
I would have kept this guy on during bad times.
He is legit.

 

[Spruewell]

I’m interested in the VBMT33x and TNMG 43x inserts. Also wondering if the Quatromill inserts are interchangeable with Sandvik Coromill R245 inserts?

 

[Jashley73]

Should I ask how someone ended up with the sales guy full of "in the car truck back" full off stuff.
100 percent here that things went sideways, bosses and such.
I would have kept this guy on during bad times.
He is legit.

So the items that were sold in this thread were all obsolete items that couldn't be returned back into the system, mostly because they were obsolete grades. That's why they were kept around.

If you mean why I was Axed from Seco - Well, a rocky relationship with my boss (regional manager,) not so transparent communication, and the corporate managers demands to cut staff. Thus, the axe fell on me.

Blessing in disguise i guess. On to bigger & better things.

 

[Jashley73]

I’m interested in the VBMT33x and TNMG 43x inserts. Also wondering if the Quatromill inserts are interchangeable with Sandvik Coromill R245 inserts?

They are all sold unfortunately. I would not bet on the QuattroMill inserts fitting Sandvik's R245...

These Manufacturers are usually pretty intent in milling cutters being, and staying proprietary.